Pneumatic fixed ball valve

Products > Ball Valve > Pneumatic fixed ball valve

Pneumatic fixed ball valve

Model: Q647F
Nominal diameter: DN50 ~ 500mm
Nominal: PN1.6 ~ 6.4MPa
Temperature: -28 ℃ ~ 300 ℃
Suitable medium: water, steam, oil, nitric acid, acetic
Operation: manual, pneumatic
Structure length by: GB1221-89
Flange size by: GB9113, JB79-59
Test by: JB / T9092-99
Contact purchase
shared:

Pneumatic fixed ball valve overview

Pneumatic fixed ball valves, pneumatic ball valves, ball valves are two-way valve, the flow of unlimited. The flange is connected with studs, the upper and lower stems are equipped with sliding bearings to reduce friction, the use of labor-saving, smooth. Under normal conditions: when the pressure is low, the valve seat seal relies on the spring pre-tightening force to make the valve seat close to the ball body to seal. When the pressure is high, a piston effect is formed on the valve seat. Under the action of the upstream medium pressure, To seal, fixed pneumatic valve, pneumatic valve, ball valve is widely used in process control system to achieve on or off.
 

Pneumatic fixed ball valve technical parameters

Valvestransfer methodLink formstructure typeSealing surfaceNominal pressure (MPa)Body material
Ball valve6-pneumatic 
       6s-pneumatic band manual
4-flange
Fixed ball straightF-Fluoroplastic 
       H-alloy steel 
       PPL
1.6 
       2.5 
       4.0 
       6.4
According to the table body 
       material code
Nominal diameter DN (mm)50-500
Material codeCPR
The main partsBodyWCBZG1Cr18Ni9TiZG1Cr18Ni12Mo2Ti
Ball board2Cr131Cr18Ni9Ti1Cr18Ni12MoTi
Valve stem2Cr131Cr18Ni9Ti1Cr18Ni12MoTi
Sealing ringEnhanced polytetrafluoroethylene alignment poly stupid
fillerPolytetrafluoroethylene flexible graphite
Fitness 
       with 
       working
       conditions
Suitable mediaWater, steam, oilNitric acidsAcetic acid
proper temperature-28 ° C to 300 ° C
Control typeDouble-acting / single-acting
The role of typeCut / adjust
input signalElectrical signal: 0 ~ 10mA, -4 ~ 10mA gas signal 20 ~ 100kPa
Reply voltageAC220V / DC24V
Working mediumPurification compressed gas
ActuatormodelGT series, HY series, AW series, ZSH series
Air pressure0.4 ~ 0.7MPa

Picture .png

Pneumatic fixed ball valve installation dimensions
Nominal diameter DN (mm)Size (mm)Actuator model
1.6MPa2.5MPa4.0MPa
LDD1BZ-φDLDD1BZ-φDLDD1BZ-φD
50203160125164-18216160125204-18216160125204-18Optional GTD / GTE, 
       AW / AWS, HY, 
       ZSH series actuators 
       (the above optional only for the 
       specific election based on actual requirements)
65222180146184-18241180145228-18241180145228-18
80241195160208-18283195160228-18283195160228-18
100305215180208-18305230190248-23305230190248-23
125356245210228-18381270220288-25381270220288-25
150394280240248-23403300250308-25403300250308-25
2004573352952612-235023603103412-255023753203812-30
2505334053553012-255864253703612-30     
3006104604103012-256484854304016-30     
3506865204703416-257625504904416-34     
4007625805253616-308386105504816-34     
4508646405854020-309146606005020-34     
5009147056504420-349917306605220-41