Electronic electric sleeve regulating valve

Products > Control valve > Electronic electric sleeve regulating valve

Electronic electric sleeve regulating valve

Model: ZDLM
Nominal diameter: DN25 ~ 300mm
Nominal pressure: ANSI 125 ~ 600; JIS 10 ~ 40K; PN1.6 ~ 6.4MPa
Main material: Cast steel ZG230-450, cast stainless steel ZG1Cr18Ni9Ti, ZG1Cr18Ni12Mo2Ti, SCS16) titanium
Design criteria: GB / T17213
Inspection standards: GB / T4213
Flange standard: JIS B220, JB / T79, ANSI B16.5-1981, GB / T9113, HG20594-97, HG20618-97 etc.
Contact purchase
shared:

ZDLP electric single-seat electric control valve, the PS series and 3610 series of straight-stroke electric actuator and low-flow resistance through the single-seat valve (also available with other brands straight stroke actuator). Electric actuator for the electronic integration structure, with a servo amplifier, the input control signal (4-20mADC or 1-5VDC) and the power to control the valve opening, to the pressure, flow, level, temperature and other parameters adjust. With sensitive action, simple connection, large flow, small size, high regulation accuracy. Control accuracy and performance than the DKZ type has significantly improved.

Single-seat valve for leakage on the strict requirements of the valve before and after the low pressure and a certain viscosity of the occasion. Widely used in electric power, metallurgy, chemical industry, petroleum, environmental protection, light industry, equipment and other industries.
 

1, the main technical parameters 

modelRated output force NSpeed mm / sTechnical Parameters
PSL361LPSL361LPSL361LPSL361L
201361LSA-08 
361LXA-08
1000800 
800
0.254.2 
4.2
Power: AC220V 50Hz 
Input signal: DC4-20mA 
DC1-5V 
(signal line shielded cable)  
Output signal: DC4 ~ 20mA 
Protection class: IP67 
With hand wheel 
Power: AC220V 50Hz 
Input signal: DC4-20mA 
DC1-5V 
(signal line shielded cable)  
Output signal: DC4 ~ 20mA 
Protection class: quite IP55 
Flameproof mark: ExdⅡBT4 
with handle
202361LSA-20 
361LXA-20
20002000 
2000
0.502.1 
2.1
204361LSB-30 
361LXB-30
45003000 
3000
0.503.5 
3.5
208361LSB-50 
361LXB-50
80005000 
5000
1.001.7 
1.7
312361LSC-651200065000.602.8
325361LSC-9925000100001.02.0

 

2, performance indicators 

projectIndex value
Basic error%With 361L 2.0; with PSL 0.1
Backlash%2.5
dead zone%1.0
Always point deviation%ElectricityStart point± 2.5
end± 2.5
Power offStart point± 2.5
end± 2.5
Adjustable range30: 1
Rated travel deviation%2.5
Allowable discharge L / HSingle seal in line with JB / T7387-94 Class IV less than the rated capacity of the valve × 10-4 
double seal with JB / T7387-94 Ⅲ level less than the rated capacity of the valve × 10-3

 

3, to allow pressure 

Nominal diameter (mm)2540506580100150200250300
Seat diameter (mm)253240506580100125150200250300
Execution agencyAllowable pressure difference △ P (MPa)
With PSLPSL2026.4 
3.14
6.4 
1.92
6.4 
1.23
5.1 
0.78








PSL204
4.312.761.766.4 
1.04
6.4 
0.69
5.62 
0.44





PSL208



1.861.230.786.4 
0.50
5.31 
0.35
3.97 
0.20


PSL320






1.26
0.870.496.4 
0.32
4.14 
0.22
With 361L361LSA-206.4 
3.14
6.4 
1.92
6.4 
1.23
6.4 
0.78








361LSB-50



6.4 
1.16
6.4 
0.76
6.25 
0.49





361LSC-65






6.4 
0.64
4.32 
0.41
3.23 
0.28


361LSC-99






0.630.440.253.31 
0.16
0.27 
0.11

Note: 
 1, the same grid on the row for the double-sealed type allows the pressure difference, the lower row is a single sealed type to allow pressure. 
 2, the actual configuration needs to be based on specific process parameters. If the pressure difference is not clear or the maximum working pressure is out of the range, please contact us and take appropriate measures to solve it.


4, Dimensions
Nominal diameter (mm)2540506580100150200250300
L (mm)PN1.6MPa184222254276298352451600720820
PN4.0MPa197235267292317368473600760850
PN6.4MPa210251286311337394508650800870
H1 (mm)728792105110127174209300350
With PSLH (mm)normal type7507657678458578751025104512521545
Heat sink type9009309371025104210851285130518051825
D (mm)176225
Weight (KG)23.533.540.56984112189262415635
With 361LH (mm)normal type5136506527707828001080112513451365
Heat sink type66381582295096710101340138516251645
D (mm)225310
Weight (KG)3149568499127242315463683